Haier LET19T3CW, Instruction Manual

 P.08                                                                                                                                                             Digital LED  LCD Television Instruction Manual  

CONNECTING YOUR 
TV

ANTENNA CONNECTION

Connect your aerial to the back of the TV into the 

ANTENNA IN socket. 

IMPROVE YOUR SIGNAL

To improve picture quality in a poor signal area, use a 

signal amplifier (not supplied).

CONNECT YOUR PC TO THE TV

You can use your TV as a monitor for your personal 

computer by connecting it with a VGA cable (not 

supplied).

Read your computer user guide and check it has a 

A 

VGA connector.

Turn the power off on your TV and PC.

B 

Connect a D type 15-pin VGA interface cable to 

C 

the VGA video interface connector on the PC. 
Connect the other end of the cable to the PC 
interface connector on the TV. Tighten the screws 
on the VGA connectors and connect the audio 
cable (not supplied) to the audio input socket on 
the back of the TV.

Turn on the power of the TV firstly and then the 

D 

PC.

Press the button on the TV or TV remote control to 

E 

set the video input mode to VGA.

Once the image shows, if there is noise present, 

F 

change the VGA mode to another resolution, 
change the refresh rate to another rate or adjust 
the brightness and contrast on the menu until the 
picture is clear.

CONNECT A DVD PLAYER TO YOUR 

TV

Connect the DVD video outputs (Y, P

b

, P

r

) to the 

COMPONENT (Y, P

b

, P

r

) IN socket on your TV.

Turn on the DVD player and insert a DVD.

A 

Press the button to select .

B 

Refer to the DVD player user guide for operating 

C 

instructions.

DVD

CONNECT A DVD PLAYER OR VCR TO 

YOUR TV

This is the way for connectting a DVD player or VCR to 

your TV. Make sure that both the TV and DVD player or 

VCR are switched off before you connect them.

Connect the AV DVD/VCR outputs to the AV IN 

A 

socket on your TV.

Press the

B 

SOURCE

button on the TV to set the video 

input mode to AV.

SCART INPUT

Connect the scart lead from the external device 

A 

(DVD player, Set-top box or games console) to the 
TV scart socket.

Press the

B 

SOURCE

button to select SCART mode.

Press the

C 

 PLAY

 button on the external device.

HDMI  input

Connect the cable from the HDMI device to the TV 

A 

HDMI socket.

Press the

B 

 SOURCE

 button to select HDMI mode.

Refer to the HDMI device user guide for how to 

C 

operate.