Operation
Prepare to record the program
9.Timeshift function
This TV allows you to pause and record the
currently watched digital program to a USB
storage device, and to resume to the point
where it was paused.
Formatting a USB 2.0 storage device will
be needed. Save your original data
before formatting. All the data stored in
the USB device will be erased after
formatting.
USB Drive Storage Format
Select to format the USB device and allocate the
amount of space for the Time Shift function.
The format process will take at least 2
minutes. Please do not turn off the power or
remove the USB device during formatting.
During formatting, a speed test will be done
on the USB device. If it fails, it means the USB
device may not support the Time Shift
function.
Record a paused DTV program to
USB storage device
Please do not unplug the USB storage device
when the Time Shift function is activated.
Approximately 4GB of memory buffers
about offer 140 minutes.
1. While in the DTV input source, insert
USB storage device to the USB port on the
side of your TV.
2. Press PAUSE to start Time Shift
function. The TV program paused. The Time
Shift OSD appears, and starts recording.
3. Press STOP to stop Time Shift
function and stop recording program.
EN-22
