Menu Operations
Function Menu Options
1. Press
button and
until the following menu appears
on the screen.
2. Press
button to enter the function menu and to go up and down to
select the desired option .
3.Press
button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired effect has been achieved .
Functions:
1. INPUT SOURCE : Display current mode . There are PC , COMPONENT ,
DVD , HDMI, DTV, TV, SCART, S-VIDEO to display
2. LANGUAGE: Used to select the OSD language.
3. TXT LANGUAGE: To switch the teletext languages.
4. TXT EAST/WEST: To select EAST or WEST .
5.DISPLAY MODE: To select the display mode between 4:3,16:9 and
FULL SCREEN
6.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds
if there is no signal.
7. RESET : Press
to reset some settings to the factory default .
8. HOTEL LOCK: Press
to enter it and the following appears on the screen:
MENU
V+/V-
P+/P-
V+/V-
V+
V+
INPUT SOURCE
TV
TXT LANGUAGE
PAN EUROPEAN
TXT EAST/WEST
EAST
BLUE SCREEN
ON
DISPLAY MODE
4:3
LANGUAGE
ENGLISH
RESET
HOTEL LOCK
FUNCTION
Only available for special series
PASSWORD:
- - - -
If password is correctly entered, the Lock set menu will be entered. If the
password is not correctly entered, you will be required to reenter the password
and the cursor will stay at the first place. Lock set menu is as follows:
(The initial password is 0000. If CLEAR LOCK is activated, the password
comes back to initialization and each lock is canceled)
Only available for some countries
