Data Side
Basic Playback
Preparations
Press the DTV/DVD button on the remote control
to enter the DVD status.
1. Place the DVD in the disc slot as figure above. The
disc will be loaded automatically after one to two
seconds, then the DVD player reads the DVD and
displays the opening menu.
If there is no disc placed
on the disc slot in DVD mode, OPEN will display on
the screen all the times)
There is only one disc size can be loaded in
the disc slot .
Do not place a disc which is unplayable in this
DVD player.
Some disc may not playback automatically,
you can press PLAY/ENTER button to start
playback.
2. Some disc may start playback with a menu,
use the cursor button on the remote control to
select menu options and press PLAY/ENTER to
start, or press digits to select a menu options
directly.
1
2
. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
. Press PLAY/ENTER to resume normal playback.
Pause playback
1.
2.
3.
Press STOP
button to go to stop mode, the TV
screen will show the start-up logo. For some disc
the player can recall the location where stopped,
such as DVDs and audio CDs.
Press ENTER/PLAY to resume playback from the
location where playback is stopped.
Press STOP twice to stop completely.
Stop playback
Previous and Next
During playback, press PREV
key can go back
to the beginning of this chapter, then each press of
this key will skip a chapter till the start of the disc.
(note: Disc function may vary depending on disc
format)
Each press of NEXT
key during playback will
skip the current chapter and play the next one.
Fast forward and Fast reverse
1
2
3
4
. Press FWD
to fast forward through the disc.
Each time the FWD
button is pressed, the fast
forward motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
. Press PLAY/ENTER to resume normal playback.
. Press REV
to fast reverse through the disc.
Each time the REV
button is pressed, the fast
reverse motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
. Press PLAY/ENTER to resume normal playback.
Basic playback
1
2
. Press the PAUSE/STEP button to pause the
playback.
. To view the next frame, press the PAUSE/STEP
button. Each press of the PAUSE/STEP button
advances the film by one frame.
Single step playback
Basic Playback
Note: The unit do not allow enter DVD mode(or place
a DVD in the disc slot) again after it have just left to
avoid any damage of the DVD. Wait for 10 seconds
to enter again.
Press this button can zoom enlarge or lessen the picture.
Each time pressed the picture times will be change.
ZOOM
When pressing the D.CALL button repeatedly
different OSD indicator will be displayed for
different types of disc DVD, CD etc
D.CALL
In zoom mode press navigation buttons to move
the picture displayed on the screen
