GRUPAd.o.o.
10
8\10HP
subcooler
12\14\16HP
subcooler
5.5 Heat exchanger adopts the subcooling technology, to keep the refrigerant
in indoor unit flowing normally, further to enhance the unit efficiency greatly.
Outdoor adopts the sub-cooling heat exchanger. In cooling mode, the refrigerant will be cooled further
after being condensed to enhance the over cooling state. Thus the refrigerant will be prevented
changing into gas-liquid mixture in the long pipe and high drop system, and the liquid refrigerant
will flow into the indoor unit evenly to ensure the effect of every indoor unit is normal. Thoroughly
prevent the gas refrigerant flowing into indoor installed at higher place because of the instant
evaporation.
5.6 Flexible installation and design
Indoor quantity can be up to 64 sets in maximum. And the indoor total capacity can be 50%~130%
of outdoor capacity.
If there are multiple outdoors, the outdoors will be in running by turns, much longer life.
Multiple types of indoor can be chosen for different requirements.
up to 64 sets of indoor
5.7 More optional outdoor capacity
The basic outdoor unit AV08/10/12/14/16NMVERA can be combined as the standard modular.The
combined outdoors will get the capacity at the interval of 2HP, such as AV18/20/22/24/26/28...etc..
