34
Change Password
- Change the password from the previous programmed one by
entering the factory default password "0000".
Limit Watch
- Reset the time limit to the previously set amount.
Remain Time
- Amount of time left to watch TV.
Follow the steps below to select your options:
Use CH (+) and CH (-) buttons to move up and down between the options.
1. Channel Lock - Press VOL (+) or VOL (-) buttons to lock selected channel(s).
2. Search Lock - Press VOL (+) or VOL (-) buttons to lock the channel-search.
3. AV Lock - Press VOL (+) or VOL (-) buttons to lock audio and visual hookups.
4. Limit Watch - Press VOL (+) or VOL (-) buttons to select the time limit for
watching TV between 1 to 4 hours. When the "Limit Watch" time is over,
"Watch Time Over" will flash on the screen. One of the LED lights will be in red
color.
Note:
To turn the TV back on, go back into the Manager Setup menu and remove
the time limit. Follow the instructions for Limit Watch.
Proper Care and Cleaning of the TV
Warning:
Always unplug your television before cleaning to avoid electric
shock. Failure to do so may result in possible death or injury.
Caution:
Before using any cleaning products, always read and follow
manufacturer’s instructions and warnings to avoid personal
injury and/or product damage.
• Before cleaning, turn off the TV and unplug it.
• Use a soft cloth dampened with water or a mild detergent solution to
clean the cabinet and remote control.
• Do not use any abrasive chemicals, ammonia, chlorine bleach,
concentrated detergent, solvents, benzene, or other petroleum based
products. Some of these chemicals may dissolve, damage and/or
discolor the screen and the cabinet.
• Do not use excessive moisture.
• Wipe dry.
Warning:
Do not spray any type of cleaning fluid directly onto the
screen.