background image

Caution   

Never stand on, lean on, push suddenly the product or its 

stand. You should pay special attention to children to children. 

Caution

Do not place the main unit on an unstable cart stand, shelf or 

table. Serious injury to an individual, and damage to the 

television, may result if it should fall. 

 
 

Caution 

When the product is not used for an extended period of time, it 

is advisable to disconnect the AC power cord from the AC 

outlet. 

 

 
 
Caution

Avoid exposing the main unit to direct sunlight and other 

source of the heat. Do not stand the television receiver 

directly on other produces which give off heat. E. g. video 

cassette players,Audio amplifiers. Do not block the 

ventilation holes in the back cover. Ventilation is essential to 

prevent failure of electrical component. Do not squash power 

supply cord under the main unit. 

 

Caution

The LCD panel used in this product is made of glass. 

Therefore

it can break when the product is dropped or 

applied with impact. Be careful not to be injured by 

broken glass pieces in case the LCD panel breaks.

 

4

Summary of Contents for ULT-15M










































Reviews: