Connecting Water Supply and Drain
The machine should be located
within easy reach of the water
supply, the drain pipe, and an
electrical outlet The water supply
should be connected once the
machine is in the correct location,
followed by the drain hose. Drain
hose should be secure. All hoses
and connections should be checked
thoroughly before leaving machine
unattended.
IMPORTANT
For ease of installation only one (1)
pressure reducer needs to be used.
Both should be used under VERY
high pressure situations.
Normally only one pressure
reducer is needed. For above
normal pressure both reducers
may be necessary. For very
low pressure situations you
may leave both off.
3.
Summary
1.
The brass pressure reducer
must be removed from both
hoses before they can be
attached to the machine.
When hoses are attached to the
machine care must be taken to
not strip the inlet valves.
2.
COLD
HOT
!
