9
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of
appliance, unless they are of the type recommended by the manufacturer.
• To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
Caution:
Before using any cleaning product, always read and follow the
manufacturer’s instructions and warnings to avoid personal injury and/
or product damage.
Note:
It is best to clean the dispenser and its surrounding area when replacing
the empty bottle with a new one. This way you can move the unit easily
without the weight of the bottle.
GENERAL
• Before cleaning, place a dust cover on top of the water guard to prevent dust
and debris from going into the dispenser while cleaning.
• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with
warm water. Use a sponge or a soft cloth dampened with the cleaning solution
to wipe down the unit.
English
PROPER CARE AND CLEANING
PRECAUTIONS
3. Use the HOT/+ or COLD/- buttons to adjust the heating temperature.
4. When setting the heating temperature, additional bars will be added as you
increase the heating from 190°F (Min) to 203°F (Max).
5. Press the Set button 1 time, the Cooling Level will be flashing
6. Use the HOT/+ or COLD/- buttons to adjust the cooling temperature.
7. When setting the cooling temperature, additional bars will be added as you
increase the cooling from 50°F (Min) to 43°F (Max).
8. If nothing is pressed for 8 seconds the display will automatically exit the Set
Function
