>10mm
About less than 2mm after twisting
Figure 3
Connection between the water inlet hose jointer and the water faucet
Bushing
About 4mm before twisting
2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.
See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen
the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth,
otherwise it may leak water. See to Figure 3.)
1.
Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the
water inlet hose component. See to Figure 1.
Water faucet,not suitable
Install the water inlet hose
Screw
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.
remark: Before installation, the threading is 4mmabove the upper surface of the nut.
After installation, the threading is 2mm above the upper surface of the nut. See to figure 6.
Figure 6
Sign plate
4 Take off the nameplate. Twist the fastening nut as per the indication of the figure
to seal up the exit end face of the faucet. See to Figure 5.
Figure 2
Screw nut
Screw knife
3.
Fasten the four screws evenly. See to Figure 4.
water inlet hose jointer
Figure 5
Outlet end surface
Slider
Figure 1
Water faucet,suitable
water inlet hose
Figure 4
Lock level
Confirm the water faucet
For the MEMORY,BLANKET,CHILD,STANDARD programs push the RINSE botton light
select the rinse times 0.1.2.3.
is flashing ,
then push SET
"+ - "
Press the Wash button to select a wash
.Press SET
select the desired wash time,
from the MEMORY,BLANKET,CHILD,STANDARD program.
procedure
"+ - "
Press SET
The button is unavailable from the COTTON programs.
"+ - "
The button is unavailable from the QUICK programs.
"WASH " button
Press the
button to select spin
.Press SET
select the desired spin time,
from the MEMORY,BLANKET,CHILD,STANDARD program. 0-9mins
"SPIN "
procedure
"+ - "
The button is unavailable from the QUICK programs.
Press
SET
button can change the process
"SPIN"button
then press
"+ - "
E "SPIN " button
WATER
The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value
among 4, 6, 8,10 and 12 automatically.during the STANDARD program You can also set water level by yourself. After
the machine is started, it will not set water level automatically. You shall push the start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .If wet laundries
are putin, it may display water level 12. You must set suitable water level by yourself.
During operation of soak
wash and rinse program, you can push down the water level button to add water. When
you release the button, or it reaches the overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the different moisture level of the laundries.
If Speedily program is selected, it will display water level 3 . it will per form,When RINSE it will display water level 4
When STANDARD
MEMORY
BLANKET
CHILD and COTTON programs
the rinse water value will
be one level higher than the wash water value. Besides 12 water value and select the rinse water value
by youself
VALUE
After the wate level reaches 1
it will wash while water filling
F WATER VALUE button
"
"
G
button
" RYING"
D
"
Push the D
button ,then the D
is on,
D
0.5 1.0h The purpose is drying the inner tub and the outer
tub, which can avoid growing mildew on the outer tub and the inner tub.
2.0h can dry laundries
The max drying capacity of the fibre laundrie is 1.5 kg.
" RYING"
" RYING" indicator light
that means the " RYING"
program is chosen(0.5h 1.0h 2.0h).
"AIR- RY"program can not be reserved
D
D
RYING
The button is unavailable from the QUICK programs.
For cotton program, press
SET
button can change the process
"RINSE"button
then press
"+ - "
G
button
"DRYING"
H
button
"RINSE"
WASH
SPIN
RINSE
