8
4
After 15 seconds, or press”#”, Exit
Long time of
”beeps” ,indicator light extinguish.
4.2.
Normal User Re-start.
（
03#
）
Operating steps
Locks status
1 Input the “
Master Code
” then “
#
”
You will hear two beeps.
2 Input “
03
” then “
#
” within 10 seconds(before the
indicator light extinguishes )
You will hear two beeps.
3 Input “
Group No.
” within 10 seconds(before the
indicator light extinguishes)
then “
#
”(Group No.
which you want to re-start) you can also input
another group no. and then press # if you want to
block it at the same time.
You will hear two beeps. User re-start successful
4
After 15 seconds, or press”#”, Exit
Long time of
”beeps” , indicator light extinguish.
4.3
Normal User Delete
：
（
44#
）
Operating steps
Locks status
1 Input the “
Master Code
” then “
#
”
You will hear two beeps.
2 Input “
44
” within 10 seconds(before the indicator
light extinguishes)
then “
#
”
You will hear two beeps.
3 Input “
Group No.
” within 10 seconds(before the
indicator light extinguishes)
then “
#
”(Group No.
which you want to Delete) you can also input
another group no. and then press # if you want to
delete it at the same time.
You will hear two beeps. User Delete successful.
4
After 15 seconds, or press”#”, Exit
Long time of
”beeps” , indicator light extinguish.
Special note:
If there are some people around you while operating the lock, and you don
’t want to let them know your
code. You can input some digits before your code to confuse them. For example, your code is
“123456”,
you can input
“5“123456” to open the lock.
The lock will be blocked for 5 minutes if you continue to input 3 wrong codes.
When the door is open, you can press
“#” for 2 seconds to lock the door.
Program Code List
Code No.
Function
1
11
Modify Master Code
2
01
Add Normal User
3
02
Block up Normal User
4
03
Re-start Normal User
5
33
Add A Single Use Code
6
44
Delete Normal User
