7
Open door operation
Operating steps
Locks status
1 Get the Card close to the card
read area.
You will hear one beep, and indicator light keeps in blue, you can
also hear the sound of lock motor started, turn the handle to open
the door.
2 After 5 seconds
“beep” twice, red light flashes twice, back to locked status, and the
indicator light extinguishes.
3.6.
Add Code and Card Combination User
Operating steps
Locks status
1
Press “
#
” to start the lock
You will hear two beeps, front light flash blue,
and keypad illuminate.
2 Input the “
Master Code
” then “
#
”
You will hear two beeps.
3 Input “
01
” then “
#
” within 10 seconds(before the
indicator light extinguishes )
You will hear two beeps.
4 Input
“group number”
such as
“003” within 10
seconds(before the indicator light extinguish ) then
“
#
” (Group number can only be used once, if you
already use 003, then input 004 or others that is
still valid)
You will hear two beeps.
5 Input “
Code
” within 10 seconds before indicator
light extinguishes
then “
#
”
You will hear two beeps.
6 Put the “
Card
” close to the inductive place within
10 seconds before indicator light extinguishes, then
“
#
”
You will hear two beeps.
7 Press “
#
” 2 times.
Fir
st “#” “beep” twice, Second ”#” “beep” 3
times, card and code combination user added
successful.
8
After 15 seconds, or press”#”, Exit
“beep” twice, red light flashes twice, back to
locked status, and the indicator light
Note: You must set the code first, and then the card.
Under this Mode, You need to use the
Card
together with the
Code
to open the door.
Open door operation :
Operating steps
Locks status
1 Get the “
Card
”
close to the
inductive place.
You will hear two beeps, front light flash blue, and keypad illuminate.
2 Input the “
Code
”
then “
#
””
You will hear one beep, and indicator light keeps in blue, you can
also hear the sound of lock motor started, turn the handle to open
the door.
3 After 5 seconds
“beep” twice, red light flashes twice, back to locked status, and the
indicator light extinguishes.
