Page 9
Dangers arising from non-observance of safety instructions
•
Danger to personnel and to the machine.
•
Danger to the environment through leakage of hazardous substances.
•
Loss of all entitlement to redress.
Safety conscious working
•
In addition to the safety instructions given in this manual, it is essential to follow the national accident
prevention directives currently in force and any internal regulations concerning work and safety.
•
Duty of care - your personal safety, the safety of others, of the equipment and the environment is the
responsibility of everyone.
Safety instructions for maintenance, inspection and installation
•
Leakages of contaminated material must be discharged in such a way that neither personnel nor the
environment are placed at risk. Statutory directives must be observed.
•
All possible danger from electric shock must be eliminated (for details see the regulations of the country of
authority and your local power supply company).
•
Observe equipment warning signs.
•
The supervisor must ensure that all maintenance, inspection and installation work is carried out by
authorised and qualified skilled staff, who are duly informed about the machine and/or installation after
studying the manual thoroughly.
•
Work on the machine must only be carried out with the machine stopped and electrical power supply turned
off at the isolator switch.
•
Pumps or assemblies which convey, or are in contact with, harmful media must be decontaminated.
•
All safety devices (Interlocks), must be refitted and be in working order immediately after the work is carried
out, and their operations checked.
Arbitrary modifications and replacement of product parts
•
Modifications or changes to the machine are only permissible after consulting with the manufacturer.
•
Original spare parts and accessories authorised by the manufacturer contribute to safety.
•
If unauthorised parts are used, this will exempt the manufacturer from liability for any consequences caused
by the use of those unauthorised parts.
Unacceptable modes of operation
•
The safe operation of the machine as delivered is guaranteed only if it is used within the manufacturer’s
guidelines. This machine was designed on the basis of specified conditions of operation contained within
the conditions of purchase of the equipment. The specifications listed in the conditions of operation are to
be regarded as limit values and must not be exceeded under any circumstances.
•
All users should be made aware that, if the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
Summary of Contents for Quattro Vanguard Original
