About This Document
Information brochure · H-50.2 system components
V02R00 · 1134319 · 2022-11
6
2
About This Document
≤
Preface
Fall arrester equipment is mandatory in high structures and for ac-
cess to machinery from a fall height of≥ 5
m (in accordance with
DIN 18799-1) or
≥ 3
m (in accordance with EN ISO 14122-4).
The H-50.2 fall-arrest system complies with the strictest safety re-
quirements and is designed as for use as fall protection when using
access ladders and crampons – both above and below floor level.
A fall protection rail is installed in the access ladders secured to the
structure, which provides a fixed guide in the centre of the access
ladder.
Fig. 1: Hailo PARTNER H-50.2
fall arrester
The Hailo PARTNER H-50.2 fall arrester that is guided along the fall
protection rail is equipped with an energy absorbing lanyard and
connected to the safety harness.
The fall arrester is only approved for securing the user.
Because it is easy to thread onto the fall protection rail, has a self-
locking mechanism in the event of a fall, and slides smoothly along
the fall protection rail without obstructing the user, it guarantees
safe ascent and descent.
NOTE
Please read this information brochure in entirety and observe all
safety instructions before starting assembly work and using the
H-50.2 fall-arrest system.
Contents of the
information brochure
This information brochure describes assembly, use, maintenance
and inspection of the
H-50.2 fall-arrest system.
This information brochure
in other languages
If the H-50.2 fall-arrest system is resold to a buyer in another coun-
try, it is necessary for the safety of the user that this information bro-
chure be made available in the respective national language.
NOTE
The designations in this brochure and all related documents are
used in accordance with DIN EN 353--1:2018, and “Guided
type fall arrester including fixed guide” and “Fixed guide” have
been replaced by “Fall-arrest system” and “Fall protection rail”
for a better user understanding.
