Safety
Information brochure · H-50.2 system components
V02R00 · 1134319 · 2022-11
16
4.4
Markings and information on the H-50.2 fall-arrest system
Fig. 2: Markings and information
Pay particular attention to all labels, stickers with
safety instructions and safety regulations.
1
Information on the H-50.2 fall-arrest system
Safety instructions for the use of the fall ar-
rester and use of the H-50.2 fall-arrest sys-
tem.
2
Access ladder nameplate
Material and dimensional specifications and
information on access ladder loads.
3
Ladder identification plate
Information on the H-50.2 fall-arrest system.
Inspection of the access ladder at least once
a year by an expert, documented by an in-
spection tag.
4
Nameplate for the H-50.2 fall protection rail
5
Fall protection rail batch number
6
Marking for the barrier for non-approved fall
arresters (at a height of max. 3 m above the
access level).
IMPORTANT!
The H-50.2 fall-arrest system must be marked by
a nameplate at the access point, which indicates
which fall arresters must be used on the H-50.2
fall-arrest system.
When using new types of fall arresters, the oper-
ating company must ensure that this information
is visible to the user.
NOTE
Customer-specific safety and information signs
may also be used which are neither described
nor shown here.
