19
en
The dimensions and weights are listed in the table
on page 156, 157.
Dimension and weight values are approximate values.
Technical modifications reserved.
The following figures show, by way of example, the
3-section combination ladder.
All general information and data also apply to the
2-section combination ladder.
3. Scope of delivery
1 x Instructions for use
1 x Combination ladder
1 x Crossbar
Check that the contents are complete and check
for any possible transport damage before use.
Remove the packaging material.
WARNING
Risk of suffocation!
Packaging material is not a children’s toy; there is a
risk of suffocation if not handled properly.
This ladder is a moveable work tool that can be used
in various locations.
With this ladder, small scale jobs can be carried out
at heights at which use of other work tools is not
commensurate.
This ladder may only be used as specified in these
instructions for use. Any other use is considered as
non-intended use and may lead to property damage
or even to personal injury.
The ladder is not a toy.
The manufacturer or dealer shall not assume any
liability for damage that has been caused by
improper or incorrect use.
The user must always ensure that the ladder is
suitable for the respective use; if necessary a risk
assessment must be carried out in advance.
The legislation in the country of use must be
complied with.
The 3-section combination ladder and
the 2-section combination ladder are
suitable for either
“professional use” or “non-professional use”.
The highest possible load capacity of the ladder
is 150 kg.
Modifications to the ladder that are not authorised
by the manufacturer shall lead to termination of the
guarantee and warranty.
4. Intended use
