21
en
Use non-conductive ladders for unavoidable live
electrical work.
Do not use the ladder as a bridge.
Do not modify the ladder design.
Do not move a ladder while standing on it.
For outdoor use caution to the wind.
The crossbar must be installed
before using the ladder.
(see 6. Instructions for assembly)
Ladder for
“professional” and
“non professional”
use.
Leaning ladders with rungs shall be
used at the correct angle.
Warning, electricity hazard.
Identify any electrical risks in the
work area, such as overhead lines or
other exposed electrical equipment
and do not use the ladder where
electrical risks occur.
Do not carry equipment which is
heavy or difficult to handle while
using a ladder.
Do not wear unsuitable footwear
when climbing a ladder.
Do not use the ladder if you are
not fit enough. Certain medical
conditions or medication, alcohol
or drug abuse could make ladder
use unsafe.
Do not spend long periods on a ladder without
regular breaks (tiredness is a risk).
Prevent damage of the ladder when transporting
e.g. by fastening and ensure they are suitably
placed to prevent damage.
Ensure the ladder is suitable for the task.
Do not use the ladder if contaminated,
e.g. with wet paint, mud, oil or snow.
Do not use the ladder outside in adverse
weather conditions, such as strong wind.
For professional use a risk assessment shall be
carried out respecting the legislation in the country
of use.
When positioning the ladder take into account risk
of collision with the ladder e.g. from pedestrians,
vehicles or doors.
Secure doors (not fire exits) and windows where
possible in the work area.
