hs dock
Removal
76
Order h49 7144.907-333
8. Remove the spacer from product 1.
9. Remove product 1 [see »Removal of the hydraulic port
variant of the product from the underside of the product«
chapter, or the »Removal of the laterally mounted hy-
draulic port variant of the product« chapter as applica-
ble].
10.3.5 Removal of the product together with the installed clamping device
1. Remove the product together with the clamping device
from the machine table / the base plate [see »Removal
of the hydraulic port variant of the product to the under-
side of the product« chapter, or the »Removal of the lat-
erally mounted hydraulic port variant of the product- se-
cured by means of fixing screws« chapter]. Attention
must be paid to the following points:
The fixing screws on the product are replaced by the
fixing screws for the combination.
2. Remove the clamping device from the product [see »Re-
moval of clamping device« chapter]. Attention must be
paid to the following points:
The actuating unit must be moved manually into
both limit stop positions.
This dispenses with the releasing and removal of
fixing screws from the clamping device. The fixing
screws for the combination were removed in the
previous step.
