MANDO Adapt T212
Safety
Order h49 7144.907-333
17
Safety footwear
To protect the wearer from any heavy items that may fall,
and from losing their footing on slippery ground.
Protective goggles
To protect the eyes from projectile parts and liquid
splashes.
Hair net
To protect long hair from getting snagged in rotating parts
on the machine tool.
Additional personal
protective equipment
When carrying out certain work, additional personal protec-
tive equipment is required. Separate reference is made to
this in the individual chapters of this manual. The following
section explains these additional items of personal protec-
tive equipment:
Protective gloves
To protect the hands from friction, chafing, stabbing or
deeper injuries and from contact with hot surfaces.
Hard hat
To protect against falling and projectile parts and materials.
2.5 Particular hazards
The following section names residual risks resulting from the
installation of the product in a machine tool. In all cases, the
residual risks detected during a risk assessment of the ma-
chine tool need to be named by the operator.
Pay attention to the safety instructions named here, as well
as the warning notices in other chapters of these operating
instructions to reduce the risk of health hazards and to pre-
vent dangerous situations.
