MANDO Adapt T212
Use and limits of use
Order h49 7144.907-333
31
5 Use and limits of use
5.1 Use
The product is a clamping device that may only be used to
clamp a rotationally symmetrical workpiece to enable it to
be machined.
The product can only be used in combination with a suitable
basic clamping device from HAINBUCH.
As well as for its general field of application, this product
was designed and developed for use, when necessary, in a
specific and documented application [see clamping situa-
tion drawing or order confirmation].
Any other fields of application require the explicit approval
of the manufacturer.
The clamping device is used for the internal clamping of
workpieces.
5.2 Limits of use
Limits are set on the operation of segmented mandrels in the
area where workpieces are machined.
5.2.1 Nomenclature
Brief des-
ignation
Unit
Explanation
𝐹
𝑧
𝑁
Centrifugal force
𝑚
𝑘𝑔
Mass of the segmented clamping bushing
𝑚
𝑤 𝑚𝑎𝑥
𝑘𝑔
Maximum workpiece mass
𝑟
𝑠
𝑚
Distance between mass center of gravity
of segmented clamping bushing and rota-
tional axis of the segmented mandrel
Table 3:
Nomenclature application limits
5.2.2 First limit [workpiece length]
To assist with clamping of the workpiece when working with
very long workpieces, a tailstock or a back rest.
