MANDO Adapt T212
Safety
Order h49 7144.907-333
13
DANGER
Serious injuries caused by parts being ejected
centrifugally after defective setting of the ma-
chine!
Set up the end-stop requests by the machine tool
on the product involved.
On a regular basis, check the end-stop requests
of the machine tool [see »Maintenance schedule«
chapter].
If the limit stops are not reached, the product must
not be used any more.
2.2 Personnel requirements
WARNING
Serious injuries caused by incorrect handling of
the product by insufficiently skilled or trained per-
sonnel!
All activities must be performed by skilled staff
from the relevant specialist field.
WARNING
Serious injuries caused by unauthorized presence
of unauthorized personnel in the working area!
Keep unauthorized people away from the working
area.
If in doubt, speak to people and direct them to
leave the working area.
Interrupt work until unauthorized people have left
the working area.
NOTE
Serious damage to materials caused by incorrect
handling of the product by insufficiently skilled or
trained personnel!
All activities must be performed by skilled staff
from the relevant specialist field.
This manual name the following skills sets required for vari-
ous different areas of activity:
Skilled specialist
Skilled specialists, due to their professional training,
knowledge and experience and awareness of applicable pro-
visions, are capable of carrying out the work entrusted to
them and independently to identify and avoid potential haz-
ards.
