ms dock
Use
44
Order h49 7144.907-333
8.3 Removal of the clamping device
A
Clamping device
A1 Fixing screws clamping device
If a break in production occurs that lasts for more than three
days, the clamping device must be removed and stored
safely in accordance with the manufacturer's stipulations
[see operating instructions for the clamping device].
8.3.1 Removal of the functional unit
1. As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
2. Attach any lifting gear that may be required.
3. If necessary, fit the mounting aid onto a vertically sus-
pended spindle.
4. Move the actuating unit into its rear limit stop position.
Summary of Contents for ms dock
