TESTit
Safety
18
Order h49 7144.907-333
Hard hat
To protect against falling and projectile parts and materials.
2.5 Particular hazards
The following section names residual risks resulting from the
installation of the product in a machine tool. In all cases, the
residual risks detected during a risk assessment of the ma-
chine tool need to be named by the operator.
Pay attention to the safety instructions named here, as well
as the warning notices in other chapters of these operating
instructions to reduce the risk of health hazards and to pre-
vent dangerous situations.
Sharp-edged parts
WARNING
Serious cut injuries caused by sharp-edged parts
and burrs!
All installation of individual parts must be per-
formed by skilled staff from the relevant specialist
field.
Also wear the following items of personal protec-
tive equipment, in addition to the basic equip-
ment:
2.6 Functionality
WARNING
Serious injuries caused by severe contamination
of the product!
Always comply with the cleaning instructions and
intervals [see »Cleaning« chapter].
NOTE
Incorrect measurement results due to insufficient
cleaning and service intervals.
Always comply with the cleaning and intervals
[see »Cleaning« chapter].
