GETTING S
TAR
TED
10
GETTING STARTED
Charging
Charge your LaserBand for 2-3 hours before initial use.
Charge the LaserBand by plugging the power cord
directly into the charging socket on the bottom right side
of the LaserBand. Plug the other end into an electrical
socket.
The indicator light on the power
button will flash blue during the
charging process. A steady blue
light indicates your LaserBand is
fully charged.
When the LaserBand is turned on,
the indicator light will be green. As the
battery power diminishes, the light will be blinking slowly
between green and orange. When the battery is getting
low and needs to be recharged, the light will start to flash
rapidly between green and orange. The lasers will turn off
and the vibrator puts out three quick pulses. When this
happens, charge your LaserBand as described above.
Your
LaserBand
comes with a rechargeable battery
permanently installed. Read this manual completely
before you start to use your LaserBand.
Use the LaserBand for less
than 90 seconds, 3 times a
week. The treatments should
be spaced every other day,
for example Monday,
Wednesday, Friday. Do not use the LaserBand more than
the recommended treatment time per day. Most users
see benefits in as little as 16 weeks (based on clinical
studies).
When you receive the LaserBand, take all the parts out
of the case. Remove the red safety label. The power
button is located under the red safety label. You must
charge your LaserBand for 2-3 hours before initial use.
90
seconds
less
than
161804_Lex.indd 13
161804_Lex.indd 13
6/16/15 5:30 PM
6/16/15 5:30 PM
Process Cyan
Process CyanProcess Magenta
Process MagentaProcess Yellow
Process YellowProcess Black
Process Black
