CLEANING Y
OUR HAIRMAX | ELECTRIC
AL SAFET
Y
16
CLEANING YOUR HAIRMAX LASERBAND/ELECTRICAL SAFETY
Cleaning your HairMax LaserBand
Keep your LaserBand clean.
Turn off the LaserBand by pressing and
holding the power button until the light turns off.
Unplug the power cord from the device
and from the electrical wall outlet.
Clean the laser window with a soft, slightly
moistened cloth.
To clean the teeth, gently remove any
hair or dust with a slightly moistened towel.
Don’t use any acetone or solvents
To clean the teeth
more thoroughly
, remove them
from your LaserBand by gently pulling in either
bottom of the teeth frame. Clean the teeth with
soap and water. Avoid any solvents or harsh
cleansers on any part of your LaserBand.
To replace the teeth, insert and
align the teeth and press on
either side of the LaserBand
until they snap in place. Please
note, there is a front and back
to the teeth. They will only fit
properly in one direction.
If you need to replace the teeth, you
can order online at hairmax.com or call Customer
Service toll-free at 1-866-527-3726.
Electrical Safety
Basic safety precautions should be observed when
using this, or any other electrical device, especially
when children are present.
WARNING:
Keep away from water. Contact with
water may result in an electrical shock.
HAIRMAX
161804_Lex.indd 19
161804_Lex.indd 19
6/16/15 5:30 PM
6/16/15 5:30 PM
Process Cyan
Process CyanProcess Magenta
Process MagentaProcess Yellow
Process YellowProcess Black
Process Black
