7
REPLACING THE BATTERIES
The Advanced 7 is powered by four(4) AA batteries. Use the following
steps to replace the batteries:
1. Using an ordinary Phillips screwdriver, remove
the battery compartment screw. See Graphic
(e) on Page 6. The screw will remain attached
to the housing.
2. Gently lift battery compartment cover (A)
3. Insert batteries. Be sure to align batteries as
shown on bottom of battery compartment (B).
4. Replace cover. Tighten screw.
The HairMax Advanced 7 is designed to provide the optimum laser
output even as the batteries age. When the batteries weaken to the
point where they will no longer power the lasers to their optimum
power level, the green BATTERY INDICATOR (b) will flash from green to
red and the lasers will flash. This is an indication that the batteries
need to be replaced. Please follow the instructions above to replace
the batteries.
In addition, the Advanced 7 can be powered
directly by the optional POWER CORD. Plug the
power cord into the end of the Advanced 7. Plug
the other end into a electrical outlet. See
graphic (C).
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
(A)
(B)
(C)
Summary of Contents for LaserComb Advanced 7
Page 1: ...USER MANUAL...
