Sensor & Intelligent Control
1. ON/OFF button to turn on the light
2. RESET button so start programming
3. Choose necessary functional buttons of all the zones: detection
area, holdtime, standby dimming level, standby period and daylight
threshold
4. Done and leave it; the program has been well kept in the remote
now
How to Use HD03R
Sensor Programming:
For singla sensor testing purpose
1. ON/OFF button to turn on the light
2. RESET button so start programming
3. START button
4. Choose necessary functional buttons of all the zones, detection
area, holdtime, standby dimming level, standby period and daylight
threshold
5. MEMORY button to keep the program inside the remote
6. APPLY button to deliver the kept program
7. Done and leave it
For project programing purpose
@the 1st sensor
1. ON/OFF button to turn on the light
2. RESET button so start programming
3. APPLY button to deliver the kept program
@the rest sensors
1. ON/OFF button to turn on the light
2. Press + - Buttons on the right top corner to manually dim up or
down the light.
3. Press TEST(2S) button to test if the sensor has been well connect-
ed; it will keep light ON for 2S only.
Manually dimming:
