- 14 -
Operation
Fishfinder
It is available to control and confirm information in fishfinder.
▶
[MENU]->[0.Fishfinder]->[MENU]
Fishfinder 2/2
1. Color Level
This function adjusts the colors. Make it upper level, the color becomes darker.
2. Color Rejection
There are 16 color levels for fishfinder. The color bar is on the left of the Fishfinder. If the level is higher,
the color of the bar is deleted one by one.
3. Screen Color
Select he back ground color of the Fishfinder for your convenience.
4. Pulse
Select the pulse of the output from the transducer. Levels are from 0.5X until 1.5X, which depends
upon the depth. 0.5X is proper to research precise a fish school but it is not suitable to measure a
deep depth. 1.5X is opposite from 0.5X.
5. Output Power
Select the output from the installed transducer. Levels are from off to 3. It should be careful about the
depth. If you set high level in a sallow depth, the Fishfinder screen turns to red. You see nothing
expect red on the screen.
6. Bottom Zoom Range
Select the range of the bottom zoom or lock. (refer Fishfinder main modes) It is necessary to modify
the bottom.
7. Fishfinder Modes
Fishfinder modes are selectable for single frequency or dual and some functions, for example bottom
zoom or lock.(Please, refer the Fishfinder modes)