hajdu IDE75F ErP, Manual

13/44  

EN

HAJDU Hajdúsági Iparművek Rt. as manufacturer  hereby certifies that the water heater complies 
with quality features described in the quality certificate.  
 
REPAIR SERVICE! 

In order to ensure continuous control or in case of failure of the water heater, please, turn to any service 
shops contracted with out Company, as described by the 

„COMMERCIAL WARRANTY”

. If you are not 

satisfied by the repair work performed by these service shops, please turn to the Customer Service of 

HAJDU Hajdúsági Ipari Zrt

.  

Address: 4243 TÉGLÁS

Phone: (52) 582-700  Fax: (52) 384-126 

ATTENTION! 

The product includes the following accessories within the packaging box:  

1 installation and owner’s manual 
1 commercial warranty 
Please, check these items at acceptance of the water heater

. 

DEAR BUYER!

This water heater equipped tank and indirect heating can be operated from either electric energy, 
solar energy, or gas-based, coal-based or other based energy carriers.

INSTALLATION 

The  water  heater  has  to  be  installed  in  a  location  protected  from  frost,  next  to  the  water  supply 
place.  The  installation  location  must  be  selected  in  a  way  that  inlet  and  outlet  pipes  should  be 
connected easily  with the least possible elbows, furthermore, the close cover and the active anode 
should be demounted easily. 

FIXING THE WALL MOUNTING WATER HEATER (for types IDE…F and IND…F) 

The partition wall selected as the wall for the water heater to be mounted must bear the weight of 
the water heater filled up with water, thus, in case of a thin wall, strengthening flat iron items should 
be used (on the other side of the wall).  

NOTE: 

1.)

 In order to ensure exchange of the active anode, free room of 200 mm should be leaved  

         under the bottom cover.  

2.)

 The vertical wall mountable water heater of 75 - 200 litre capacity can be placed on a 3  

legged scaffold, which is delivered to the Client upon special request.  

In order to ensure perfect stability to the water heater, it should be placed on the 3 legged scaffold 
and mounted to the wall with the suspension leg, before being filled up with water. 

FIXING THE STANDING WATER HEATER (for types IDE…S and IND…S) 

Horizontal flat flooring, to guarantee absolutely vertical standing of the appliance. Vertical standing 
should be performed with adequate setting or the legs or adequately secure support of the legs. 

NOTE: 

1.) 

The unit should be installed in a way that its distance from the wall is at least 50 mm. 

2.)

 In order to ensure easy removal of the close cover and cleaning of the internal side of the 

tank, a distance of at least 70 cm  should be  guaranteed between the fitting house (the front 
surface of the water heater) and the wall or other structural building element. 

3.) 

Adequate  electric  system,  pipeline  and  waste  water  collection  systems  (floor  drains) 

should be ensured on the location of the installation.