－3－
WARNING
10. Use CONSEC recommended accessories and options.
◎
In case that you use the accessories and the options which are not listed in the manual or
CONSEC's catalogue, it might cause the accidents or personal injury. Please do not use
the accessories and the options which CONSEC does not recommend.
11. Inspect for the damaged parts.
◎
Before using, please inspect the protection cover and other parts damages
carefully, and
make sure that whether the machine operate properly and the designed functions work or
◎
Check for alignment, binding of moving parts, parts damages, mounting, and any other
conditions that may affect operation.
◎
Regarding the exchange or the repair for the damaged parts, please follow the
◎
In case that there are no instructions in the manual, please contact to the distributors or
◎
Do not use the electric tool if the switch cannot be turned on or off.
◎
If the switch is broken, please contact to the local distributors or CONSEC for repairing.
12. Turn the electric tool off and remove the plug from the power supply as following cases.
◎
In case that the machines is not used or repaired.
◎
When exchanging the options such as blade or core bits.
◎
In case that you can anticipate other hazardous situations.
13. Remove the key or the wrench for sure.
◎
Before turning on the switch, please make sure that the key and the wrench which are
used for the inspection and adjusting are removed.
14. The electric machines are maintained carefully.
◎
Regarding exchanging the options, please follow the instruction.
◎
Keep the grip dry and clean, and avoid the oil or grease.
◎
Inspect the cord regularly. In case that there are damages, please contact to the
distributors or CONSEC for repairing.
◎
In case that you use the extended cord, inspect it regularly. If there are damages, please
replace it.
15. In case that you do not use the tools, please store it appropriately.
◎
Store the place where keep children away, locking is available and dried place.
16. Avoid accidental starting.
◎
Do not carry the tools with connecting to the power supply.
◎
Before plugging the plug into the power supply, please make sure that the switch is off.
17. Use an appropriate extension cord for outdoors.
◎
In case that you use it in outdoors, please use the extension cord of cab tire cord or cab tire cable.
18. Use the appropriate tools according to your work.
◎
Do not use the small electric tools and accessories for the work which is done by using the
large electric tools.
19. Contact CONSEC's sales (service) representative for repairing of the electric tools.
◎
The machine is manufactured in compliance with applicable safety standards.
Do not remodel machine and tool.
◎
In case that the unauthorized person repairs it, it might cause the machine failure,
accident or personal injury.
◎
Contact to CONSEC’s sales (service) representative for repairing.
