12 / 40
Hakki Pilke 38 Pro
Translation
Version 3
B.
Adjustment for the running speed of the out-feed
conveyor.
-
Turning the knob anti-clockwise increases the
speed, and vice versa.
C.
Wood gripper handle. With the handle, wood can
be pressed against the table during sawing in
order to make cutting the wood as safe and stable
as possible.
D.
Accessory and out-feed conveyer swivel (optional)
control valve.
-
Lever forwards/backwards: Out-feed conveyor
turns
left/right (optional)
-
Lever right/left: Accessory control
E.
Joystick for the sawing and splitting functions,
splitting blade and in-feed conveyor.
Operation of the controls in Figure 11
-
Right/left: In-feed conveyor control
-
Button A: Activation for splitting.
-
Button B: HakkiCut™ control button for the
cutting function.
-
Forwards/backwards: Splitting blade is
lowered/raised
Figure 11. Joystick
3.2.1.
Tractor drive
A tractor-powered firewood processor is
connected to the tractor’s three-point
lifting devices and cardan shaft. To
connect the combi machine to the
cardan shaft, you have to move
protective cover A of the socket and
multiplier gear into a position where it
covers the socket.
Connecting the cardan shaft is a task for
only one person. When connecting the
machine to the tractor, there must be no
one in the tractor cabin, so as to prevent
any accidental contact with the controls.
Check all the connecting devices of the
tractor and the firewood processor
before connecting them. Never use
