8 / 40
Hakki Pilke 38 Pro
Translation
Version 3
When connecting the machine to the tractor's lifting equipment, the tractor cabin must be free of people, in
order to prevent any accidental contact with the controls. Check all the connecting devices of the tractor and
the firewood processor before connecting them. Never use faulty equipment. The pins that are used to
connect the pushbars and drawbars to the machine must be of the correct size, and the appropriate locking
pins must be used to secure them.
The machine must be placed in the transport position if it is to be moved more than 5 metres. Exercise
extreme caution when moving the machine in the operating position. Always lower the machine to the
ground when you stop.
Note! Incorrect lifting may cause a hazardous situation or damage the machine.
2.3.
Main components of the machine
The Hakki Pilke 38 Pro is a firewood processor with fully hydraulic controls. In other words, all of the
machine's functions are controlled hydraulically with operating levers on the machine's control panel. The
guard of the cutting and splitting section is interlocked with the machine's operation: opening the guard stops
all functions.
A.
In-feed
conveyor
B.
Control unit
C.
Cutting
and
splitting unit
D.
Out-feed
conveyor
Figure 2. Main components of the machine
