24 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
4.3.4.
Using the quick couplings of the additional hydraulics
1.
Connect the additional hydraulics
(e.g. when using the lateral transfer
mechanism of the HakkiFeed 472 log
table) by pushing the auxiliary
device’s hydraulic hoses into quick
couplings A and B in Figure 18.
Connect the accessory hose (marked
in red) to quick coupling A.
2.
Use the additional hydraulics with
controller A in Figure 10.
Note! If the log table’s hydraulic motor
features an overflow hose, for example, it
must be connected to quick coupling C, i.e.
the direct line to the hydraulic tank.
Figure 18.
4.3.5.
Connecting a log table’s in-feed rollers to the in-feed conveyor
A log table’s (e.g. HakkiFeed 472) in-feed rollers can be connected in series with the in-feed conveyor.
This way, the rollers are automatically synchronised to operate with the input conveyor when feeding
logs using joystick E (Figure 10). Connect the hoses of the log table to the machine’s in-feed conveyor as
follows:
1.
Turn off the machine
and
disconnect
it
from
the
power
source.
2.
Remove hose B from
quick
coupling
A
(Figure 19).
3.
Connect the pressure
hose of the log table
rollers (marked in red)
to quick coupling A.
4.
Connect the return
hose of the log table
rollers to hose B (with
a female coupling).
Figure 19.
