38 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
Figure 47.
Figure 48.
5.6.
Saw chain lubrication
The saw chain is automatically lubricated
whenever it rotates. In other words, oil is fed
to the saw chain hydraulically from the tank
with a controlled pump, and the pumping
motion occurs when the saw begins to run.
You can adjust the amount of saw chain oil fed
to the chain with the help of hex socket screw
A (Figure 49), i.e. the amount of oil decreases
when the screw is tightened and vice versa.
The factory setting for screw A (Figure 49) is 4
turns towards the open position from the
closed position. Increase or decrease the
amount as necessary according to the size
and type of wood, air temperature and type
of oil.
Figure 49.
