42 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
5.8.
Guard mesh safety device
The safety device connected to the guard mesh is
located behind the relay housing (Figure 55, item
A). The easiest way to access the safety device is to
detach the machine’s rear guard and removing the
screws circled in Figure 55.
The safety device operates as follows:
1.
When the head of bolt B presses the safety
sensor switch C to the lower position
(Figure 56), the electrically controlled
functions, such as sawing and splitting, are
operational.
2.
When the head of bolt B is raised slightly
when the guard is opened (approx. 5 mm),
all electrically controlled functions (splitting
and sawing) stop working.
Figure 55.
Figure 56.
