Lead forming tool
•
Lead cutter and former for axial components
•
Lead cutting operation for taped components can be continuously performed using the
same size settings once they are made
•
Possible to use together with 152B (motor drive)
Model No.
153-1
154-1
Forming size
5.6mm pitch
5mm pitch
Max.diameter of lead wire
Φ
0.8mm (MAX.)
Φ
0.5mm (MAX.)
Lead wire
For annealed copper lead wire only
Outer width of tape
85mm (MAX.)
Taping pitch
5mm
Dimensions
125(W)×130(H)×110(D)mm
Weight
2kg
* Square lead wire is not adapted.
* Weight (w/ handle, clamp)
Cutting and forming for tape-type axial components and annealed copper lead
wire
Easy to use - simply set the taped components in place and turn the handle.
Ideal for processing tape-type components.
Improved, longer-life cutting blade for a clean, smooth cut.
Sealed bearings for longer service life and greater durability and efficiency.
Can be used for forming and cutting, forming only, or cutting only.
