![background image](http://html1.mh-extra.com/html/hakko-electronics/937/937_instruction-manual_3331346003.webp)
2
3. WARNINGS AND CAUTIONS
In this instruction manual, “WARNING” and “CAUTIONS” are defined as follows.
WARNING
WARNING: Misuse may potentially cause death of, or serious injury to, the user.
CAUTION : Misuse may potentially cause injury to the user or physical damage
to the objects involved.
For your own safety, be sure to comply with these precautions.
CAUTION
When the power is on, the tip temperature is between
200
°
C/400
°
F and 480
°
C/ 899
°
F.
Since mishandling may lead to burns or fire, be sure to comply with
the following precautions.
●
Do not touch the metallic parts near the Tip.
●
Do not use the product near flammable items.
●
Advise other people in the work area that the unit can reach a very high
temperature and should be considered potentially dangerous.
●
Turn the power off while taking breaks and when finished using the unit.
●
Before replacing parts or storing the unit, turn the power off and allow the unit
to cool to room temperature.
To prevent damage to the unit and ensure a safe working
environment, be sure to comply with the following precautions.
●
Do not use the unit for applications other than soldering.
●
Do not rap the soldering iron against the work bench to shake off residual
solder, or otherwise subject the iron to severe shocks.
●
Do not modify the unit.
●
Use only genuine HAKKO replacement parts.
●
Do not wet the unit or use the unit when your hands are wet.
●
Do not bend or damage the card. Should the card become bent, do not force
the card into the station.
●
The soldering process will produce smoke, so make sure the area is well
ventilated.
●
While using the unit, don’t do anything which may cause bodily harm or
physical damage.
Summary of Contents for 937
Page 20: ...2004 2 MA00110JN040219 19...