Hakko Electronics FM-205, Instruction Manual

2

Filter pipe assembly

Replace as a cartridge.

Front holder

Back holder

Back holder release button

The back holder will be locked 
until this button is presssed.

Nozzle release button

Remove the nozzle from
the grip while pressing this button.

Nozzle
(Not included)

Back holder bushing

Push button

Suction start switch (when straight grip is used).

Trigger

Suction start switch (when
gun style handle is used).

Slide button

To remove the gun handle,
slide the button up to unlock it.

2. SPECIFICATIONS

●

 HAKKO FM-205 desoldering station

Power Consumption 80 W

Temperature Range

200 to 450ºC (400 to 840ºF)

Temperature Stability ±5°C (±9°F) at idle temperature

●

 Station

Output

24 V

Dimensions (W x H x D) 160 × 120 × 225 mm (6.3 × 4.7 × 8.9 in)

Weight

3.4 kg (7.5 lbs.)

Vacuum Generator

Ejector type

Vacuum Pressure (Max.) 93kPa (28 in. Hg)

Suction Flow

20 L/min.*

Applied Air Pressure

490 kPa (71 psi) When in use (trigger 

or button is pressed)

Compressed Air Consumption 46 L/min.

* This suction flow is measured at the filter case suction port of 

Station. 

●

 HAKKO FM-2027 (Option)

Power Consumption 70 W (24 V) 

Tip to Ground Resistance < 2 

Ω

Tip to Ground Potential < 2 mV

Total Length (w/o cord) 188 mm (7.4 in.) with 2.4D tip

Weight (w/o cord)

30 g (0.067 lb./1.07 oz.)with 2.4D tip

Cord

1.2 m (4 ft)

●

 MODEL FM-2024 desoldering tool

Power consumption 70 W (24 V)
Temperature range 350 - 450°C (650 - 840°F)
Tip to ground potential < 2 mV
Tip to ground resistance < 2 

Ω

Length, less cord

180 mm (7.0 in.)

Weight, less cord & hose 65 g (2.3 oz.)
Length of cord

1.2 m (4 ft.)

*   The temperatures were measured using the HAKKO FG-

101 soldering tester.

*   This product is protected against electrostatic discharge.

●

 MODEL FM-2024 desoldering tool

 CAUTION

This product includes such features as electrically conductive plastic parts and grounding of the handpiece and station as 

measures to protect the device to be soldered from the effects of static electricity. Be sure to observe the following instructions:

1.  The handle and other plastic parts are not insulators, they are conductors. When replacing parts or repairing, take sufficient 

care not to expose live electrical parts or damage insulation materials.

2.  Be sure to ground the unit during use.

* Specifications and design are subject to change without notice.

電路板

吸錫槍部分

插頭

插座

焊鐵座