8
Insert the card.
Press the or button.
Press the or button.
Press the button once.
Press the button once.
Press the button once.
●
Changing the temperature setting
• MODEL FM-2024
Temperature setting range
ºC ................350 to 450ºC
ºF ................660 to 840ºF
• HAKKO FM-2027 (Option)
Temperature setting range
ºC ................200 to 450ºC
ºF ................400 to 840ºF
Example:
Changing the temperature from
350ºC to 400ºC
1. Insert the control card into the station.
●
The hundreds digit of the display begins to
flash. This indicates that the unit has entered
the temperature setting mode and data may
be entered.
2. Enter the hundreds digit.
●
Press the
or
button to set the
hundreds digit. When the desired figure is
displayed, press the
button. The tens digit
begins to flash.
3. Enter the tens digit.
●
Press the
or
button to set
the tens digit. When the desired figure is
displayed, press the button. The units digit
begins to flash.
4. Enter the units digit.
●
Set the desired units digit in the same way
as for the tens digit, and then press the
button. The temperature is recorded to the
internal memory, and heater control begins
after the new set temperature is displayed.
To change the set temperature with
the control card in the station:
NOTE:
If you enter a value outside the temperature setting range
(see the table above), the display returns to the hundreds
digit, and you have to enter a correct value.
CAUTION
If the power is turned off without completing the
temperature setting, the new set temperature will not
be recorded.
1. Press and hold the button for at least one
second. The current temperature setting is
displayed, and then the hundreds digit begins
to flash one second later. This indicates that
the station has entered the temperature
setting mode.
Follow steps 3 to 4 on “Changing the
temperature”.
2. If the button is not pressed and held for at
least one second, the current set temperature
is displayed, and then the tip temperature is
displayed.
