Hakko Electronics fm-206, Instruction Manual

5. OPERATION

●

 Settings for the HAKKO FM-2029 Hot Air Pencil

The Hot Air Pencil can only be used on CH3. When you connect it, the screen will be as shown below.

CH1

CH2

CH3

350

℃  

Off

    Ready

SOL

100%

M

When on standby

CH1

CH2

CH3

350

℃  

Off

120

℃

SOL

100%

M

When in use

The Hot Air Pencil has a manual mode and an auto mode, and the settings that can be changed are different.

HotAir Mode

Set  Temp

Offset  Temp

Preset  Temp

Preset  ID

Ch  Power

Exit

Man

350

℃

00

℃

ON

CH3

Manual mode

HotAir Mode

Offset  Temp

Timer  Mode

Time Unit

Profile

Ch  Power

Exit

Auto

00

℃

Opn

m-s

ON

CH3

In either case, the screen is set to scroll since all of the items cannot fit on the screen. In manual mode, other 

than selecting Hot Air Mode, both the changing method and initial settings are the same as the other grips.

●

 Initial settings when in auto mode

The steps for changing settings with the same name are the same as the setting method for the other grips. 

The steps for changing settings not previously covered are illustrated below.

●

 Changing Timer Mode

1. Turn the control knob, select "Timer Mode," and press the control knob when you have made your 

choice.

HotAir Mode

Offset  Temp

Timer  Mode

Time Unit

Profile

Ch  Power

Exit

Auto

00

℃

Opn

m-s

ON

CH3

Auto mode

Timer Mode

for Auto-Mode

Opened

Closed

■

On the difference between Opened and Closed in "Timer Mode"

In Auto mode, the temperature profile shown below is followed by the system. In OPENED timer mode, the 

time for each step starts the countdown once the output air temperature reaches the set value. In CLOSED 

timer mode, the timer starts immediately regardless if the output air temperature has reached the set value 

or not.

Step 1

Step 2

Step 3

Closed

Opened

Time

Air temperature

Temperature 

rising

Temperature 

stable

Temperature 

rising

Temperature 

stable

Temperature 

rising

Temperature 

stable

Temperature falling*

*In Auto mode, a 15 second cool-down will be performed after all steps are completed and the air will stop.

2.When you have selected the desired setting, press the control knob.

HotAir Mode

Offset  Temp

Timer  Mode

Time Unit

Profile

Ch  Power

Exit

Auto

00

℃

Opn

m-s

ON

CH3

Timer Mode

for Auto-Mode

Opened

Closed

Offset Temp
Timer Mode
Time Unit
Profile

 (Temp)

（Time）

Ch Power

Initial Value

0℃ (0℉)
Opened 
min-sec
300/350/400℃ (570/660/750℉)
30/30/30sec
ON

7