50
日
本語
中 文
English
When you need one soldering iron only, refer to
the following example.
(Ex.) IRON 2 is not required
1. Change the display of IRON to
2. Press
button until the displayed figure
disappears.
NOTE:
The heat to the IRON 2 will not function.
3. Press button to display IRON 1.
The change is stored in the system memory
and does not disappear even after power off.
●
Changing the temperature setting
The allowable changes for temperature setting are:
°C..........200~450°C
°F...........400~840°F
Example: 350°C to 400°C for IRON 1
1. Confirm that the display of IRON is .
If it shows , press button to show .
2. Insert the control card into the slot in the
front of the unit.
• The
hundreds digit will begin to flash,
indicating that the unit is in the TEMPERA-
TURE SET mode and data may be entered.
3. Entering the
hundreds digit
• Press the
or
button to set the
desired figure. When the desired figure is
displayed, press the
button to enter.
The
tens digit will begin to flash.
4. Entering the
tens digit
• Press the
or
button to set the
desired figure. When the desired figure is
displayed, press the
button to enter.
The units digit will begin to flash.
5. Entering the
units digit
• Press the
or
button to set the
desired figure. When the desired figure is
displayed, press the
button to enter.
The desired temperature is now entered
into the system memory and heater
control will begin.
Insert the card.
Press the
or
button.
Press the
or
button.
Press the
button once.
Press the
button once.
Press the
button once.
NOTE:
If power is switched off or lost during the execution
of this procedure, no data will be entered. The entire
procedure must be repeated from step 1.
NOTE:
Temperature setting can be changed even during the
display for the temperature and the heat to the iron
is OFF, If MODEL FM-2025 soldering iron and tip are
connected properly.
Summary of Contents for FP-948
