35
TEACHING A RECIPE
From MAIN MENU, select EDIT/TEACH
SETTINGS and enter the password.
When the password is entered & accepted
(see ENTERING THE PASSWORD)
the Unit asks if you want to Edit Settings.
Push the MENU DN key to get the teach.
screen.
Push <MENU> at the teach screen to
run the Teach Mode. The unit will run
normally except TCH will show on the LCD
instead of RUN, and the times will be taught
based on TCH actual temp reaching Teach
Temp. (see Running A Recipe)
When you are done using Teach Mode, push
the <STOP> key. If you have made any
changes, the unit asks if you want to:
Exit & Save = <MENU> key or...
Exit without Saving = <STOP> key
SETUP/DIAGNOSTICS
From MAIN MENU, select
SETUP/DIAGNOSTICS and enter the
password.
When the password is entered & accepted
(see ENTERING THE PASSWORD),
the Unit asks if you want System Setup.
Pushing <MENU> from this screen allows
you to program a new password. Push
MENU DN and it asks if you want
diagnostics.
Pushing <MENU> from this screen puts
you into the Diagnostic Mode.
DIAGNOSTICS?
<^><v> OR <MENU>=YES
--OR--
<STOP> TO EXIT
--OR--
<STOP> TO EXIT
SYSTEM SETUP?
<^><v> OR <MENU>=YES
PASSWORD?
(6 DIGITS)
--OR--
<STOP>=EXIT W/O SAVE
EXIT & SAVE CHANGES?
<^><v> OR <MENU>=YES
--OR--
<STOP>=EXIT W/O SAVE
RUN TEACH MODE?
<^><v> OR <MENU>=YES
--OR--
<STOP>=EXIT W/O SAVE
EDIT SETTINGS?
<^><v> OR <MENU>=YES
PASSWORD?
(6 DIGITS)
