First Edition: March 31, 2007
4-5 Iron Holder (FX-951/FH-200)
4-5 Iron Holder
(1) Remove the 2 screws of the switch case to remove the switch case assembly. (4-5-1)
NOTE
Be careful not to lose the spring in the switch case. (4-5-3)
(2) Remove 1 screw of the stopper. (4-5-1)
(3) Remove 2 screws of the stay to remove the stay. (4-5-1, 4-5-2)
4-5-3
Spring for switch case
4-5-1
Stay
Switch case
Screw in disassembly procedure (3)
The spacer is installed between the screw and
iron holder base. (There is another spacer on the
opposite side.)
Screws in
disassembly (1)
Screw in
disassembly (2)
4-5-2
Pan head screw
with spring
washer P2 M3 × 8
Spacer
●
Assembly procedures (Iron holder)
(1) Attach the stay to the iron holder base with the 2 spacers and 2 screws (Pan head screw
with spring washer P2 M3 × 8). (4-5-1)
(2) Attach one screw (pan head screw with spring washer P2 M3×8) to the iron holder base.
(4-5-1)
(3) Install the spring in the switch case and attach the switch case to the iron holder base with
the 2 screws (Tapping screws M3 × 12). (4-5-1, 4-5-3)
