Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
sales@haklift.com
www.haklift.com
Lifting Solutions Group
Axel Johnson International
FORESEEN USE
Anchorage point for load lifting. The original instructions of use must always be available to the user until the
products are discarded. Check the suitability of eyebolts/nuts before each use.
NOT ALLOWED TO BE USED AS SHOWN HERE.
CHECK BEFORE EACH USE
•
The eyebolt/nut does not have defects due to wear, corrosion, cracks or visible deformations.
•
Markings must be clearly readable.
•
The loads to be lifted are in compliance with the loads of the eyebolts/nuts (the loads are specified
both on the products and in the user manual).
If these checks give a negative outcome, the eyebolt/nut must not be used anymore and must be
replaced.
CONDITIONS OF USE
•
Impacts: The load must be applied without any impact or shock loading.
•
Checks must be carried out by a qualified staff.
•
As lifting accessories, the product must undergo checks at regular intervals and scheduled in
compliance with the laws in force.
•
The product must be fitted by a qualified as it is used for lifting operations which must be carried out
in compliance with the Machinery Directive 2006/42/CE and subsequent modifications.
•
A qualified person must supervise the lifting operation and must always detect the gravity centre of
the load and position the eyebolts/nuts in order to guarantee that the said load is always balanced.
•
When eyebolts/nuts are used in a multileg assembly, care should be taken to calculate the decrease
of the WLL caused by forces acting in multiple directions. The reduction in WLL for multileg assemblies
should be checked with relevant standards / from the reference chart.
•
If the load is asymmetrical, a qualified person should assess/calculate the suitability of the lift and the
decrease of the capacity.
•
Admissible operating temperature: -40 °C to 200 °C.
•
For risky lifting operations safety measures must be taken for the people who undergo the risk.
•
If the instructions are not adhered to serious damage can be caused to things and injuries to people.
