1 Travel selector
to preselect direction of travel as
well as low and high traveling speed
forward
= forward travel
central
= neutral
lever back
= return travel
lever up
= low speed
lever down
= high speed
Note:
The lever must not be used for
slowing down speed.
Set the lever to ”neutral“ position on
principle when the machine stands
still with the engine running.
2 Dirt hopper switch
to lift / lower dirt hopper.
If the hopper is filled, increase engi-
ne speed.
3 Starter switch
to preglow, start and stop engine,
secure against unauthorized use;
0 = engine and electric system OFF
1 = preglow until yellow light dims
2 = start; depress ignition key and
turn CW until engine starts cran-
king
Note:
an installed safety feature
prevents double starting action.
4 12 V outlet
12 V outlet
to connect electrical equipments.
1 travel selector stick
2 dirt hopper switch
3 starter switch
4 12 V outlet
5 brake pedal
6 accelerator pedal
7 multi-function switch
8 steering column lock lever
The cabin outlet has a connected
load of 90 W, cabin outlet together
with the radio of 120W max.
5 Brake pedal
actuates the dual-circuit hydraulic
brake (works on all of the 4 wheels)
6 Accelerator pedal
for continuous travel speed control.
Before actuating the accelerator
pedal select direction on stick (IV/1)
= slowly depress forward end of
pedal
release pedal, will return to neu-
tral automatically, machine stops
Note:
never actuate pedal by jerks;
before reversing, allow machine
to stop; a buzzer will sound when
driving in reverse speed
7 multi-function switch
contains the following functions:
horn
windshield washer
windshield wiper (2-speed plus
interval)
hi-beam ON/OFF
hi-beam, impulse
directional flasher
IV
55
