77
check engine oil level, add as required
check coolant level in expansion tank, add as required
check hydraulic oil level on tank, add as required
visual inspection for oil leaks on engine and hydraulic system
Clean water strainer in pump inlet and both overflow strainers, re-
place if required
replace return- and suction filter cartridge (hydraulic)
Note:
First change by bio-hydraulic oil after 50 hours
change hydraulic oil
Note:
Change bio-hydraulic oil every 400 hours
Check the play of the weel bearings and replace if required
Check the toe-in 0-2 mm
check torque of wheel nuts (130Nm) for tight
fit or after wheelchange
lubricate in accordance with scheme (page 70/71)
change engine oil
replace engine oil filter
Maintenance schedule
= after the first 10 hours of operation
= after the first 75 hours of operation
service hours
daily
after 10/75
every 150
every 300
every 600
every 1200
