Service Manual
Hako GmbH
Technical Service (KUD) 23843 Bad Oldesloe
Edition: 05/2014
Confidential - For internal use only!
3.5 Filter
3.5.1 Change and Clean Cartridge Filter
•
Stop engine and pull key
•
Open seat hood
•
Remove filter case cover
•
Loosen and remove wing screws at the corner points
•
Fold up and hook jolter frame
•
Remove cartridge filter by pulling to top
3.5.2 Suction Fan Flap
•
Before collecting wet dirt or sweeping humid surfaces, change over the flap position (from filter passage to direct air flow position).
Change over by pulling the knob on the dashboard.
•
Use switch (S12) at the control wire below the dashboard to actuate the jolter motor.
Note:
Driven by a V-belt, the fan constantly runs as soon as the engine (V/D) / central motor (E) is running.
