20
Operation
3
Operation
3.1
Working Procedure
General
The Sweepmaster B1200 RH sweeper
has been exlusively designed for col-
lecting dry and moist matter from floor
surfaces in e.g. factories, storage build-
ings, parking grounds and pedestrian
areas.
Functional Description
The side broom (Fig. 4/1) is used to col-
lect dirt at corners and borders and to
enlarge the working width as well as to
increase the area performance on large
surfaces. The sweeper roller (Fig. 4/2)
casts the dirt overhead into the dirt hop-
per (Fig. 4/3). The collected fine dust is
evacuated by the suction fan and sepa-
rated by a filter system (Fig. 4/4). The
air returned into the environment is
clean. Dirt disposal at the Sweepmaster
B1200 RH is realized via lift-up disposal
(lift-up hight>1420mm) directly into
standard waste container.
Fig.4
1
2
3
4
