150
06-1491-00-12.fm
Attachments and Options
Maintenance plan – once after 50 operating hours
Sweeping unit
•
Checking wear and damage
•
Checking the sweeping level, adjusting if necessary
•
Checking the lifting cylinder and hydraulic pipes for function and tightness
•
Checking the spray nozzles, spray nozzle filter and sieve filter of the water system, cleaning if necessary
Suction mouth and suction duct
•
Checking wear and damage
•
Checking the suction mouth setting, adjusting if necessary
•
Checking the coarse material flap and suction mouth lift for function and damage
•
Checking the suction hose for wear and seating
•
Checking the seal between suction duct and dirt hopper
Dirt hopper
•
Checking the suction fan for speed and contamination
•
Checking the V-belt of the suction fan for condition and tension, tensioning or replacing them if required.
•
Checking the lifting cylinder and hydraulic pipes for function and tightness
•
Checking the seals of the hopper lid for tightness and damage
•
Checking the dirt hopper hand pump for function
Maintenance plan – once after 250 operating hours
Sweeping unit
•
Checking wear and damage
•
Checking the sweeping level, adjusting if necessary
•
Checking the spray nozzles, spray nozzle filter and sieve filter of the water system, cleaning if necessary
•
Check the trailing rubber strap at the 3rd rotating brush (3-brush system only)
Suction mouth and suction mouth duct
•
Checking the suction mouth setting, adjusting if necessary
•
Checking the coarse material flap and suction mouth lift for function and damage
•
Checking the suction hose for wear and seating
•
Checking the seal between suction duct and dirt hopper
Dirt hopper
•
Checking the suction fan for soiling
•
Checking the V-belt of the suction fan for condition and tension, tensioning or replacing it if required.
•
Checking the impact plate of the hopper lid for wear
•
Checking the seals of the hopper lid for tightness and damage
•
Checking the joints and bearings of the hopper lid
•
Checking the exhaust side of the hopper lid for contamination
•
Checking the lifting cylinder and hydraulic pipes for function and tightness
•
Checking the dirt hopper hand pump for function
Summary of Contents for Citymaster 1600
