06-1491-00-12.fm
153
Attachments and Options
Checking the rotating brush pressure
Adjust the rotating brush pressure with the adjusting screw
.
The sweeping level must be adjusted with increasing wear.
Checking the sweeping level (2-brush system)
The sweeping level
Fig. 149-A
is adjusted in the factory with the screws
and
.
1. Raise the front sweeping machine with the joystick
2. Drive over a level surface covered with dust or chalk.
3. Lower the sweeping unit and let the rotating brushes turn for a short
time.
4. With correctly adjusted sweeping level, the following pattern must result
in driving direction:
•
Right rotating brush from 10 a.m. to 4 p.m.
•
Left rotating brush from 8 a.m. to 2 p.m.
Fig. 147:
A
Fig. 148:
B
A
Fig. 149:
A
Summary of Contents for Citymaster 1600
